Product ID:ILUX SPECIAL THINNER, 216
MSDS Date:05/10/1989
FSC:8010
NIIN:01-147-6854
MSDS Number: BPWZJ

INTERNATIONAL PAINT CO INC

2270 MORRIS AVE
UNION, NJ 07083-5704
US

Emergency Phone: 201-635-1300

Info Phone: 201-635-1300

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

XYLENE (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 95-100%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:CAN CAUSE IRRITATION WITH
REDNESS, TEARING AND BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN
DERMATITIS. INHAL:IRRITATION OF RESPIRATORY TRACT. HEADACHE,
DIZZINESS AND UNCONSCIOUSNESS. INGEST:MA Y CAUSE GASTRO-INTESTINAL
IRRITATION. CHRONIC OVEREXPOSURE TO, AND MISUSE OF, SOLVENTS (EFTS
OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:HAS BEEN LINKED TO PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:REMOVE
CONTAMINATED CLOTHING. WASH SKIN WITH PLENTY OF SOAP AND WATER.
LAUNDER CLOTHES BEFORE REUSE. INHAL:REMOVE TO FRESH AIR. GIVE
ARTIFICIAL RESPIRATION IF NEEDED. GET MEDICAL ATTENTION.
INGEST:CALL A PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT TO
INDUCE VOMITING.

Flash Point:80F,26.7C
Lower Limits:1%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/ONE OF EXTING MEDIA. WATER MAY BE USED TO COOL
UNOPENED CONTRS, BUT MUST NOT BE (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARKS OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BUILDING DESIGNED AND
PROTECTED FOR STORAGE OF LIQUIDS WITH NFPA CLASS IC.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED WITH THIS PRODUCT.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
A NIOSH/MSHA APPROVED FILTER RESP TO REMOVE SOLID AIR-BORNE
PARTICLES OF OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT
AREAS, USE NIOSH/MSHA AP PROVED RESP I/A/W (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOLUME & PATTERN, TO KEEP TLV &
LEL OF HAZ INGRED BELOW LIM SPEC, & TO REMOVE (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG&FULL LENGTH FCSHLD.
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE & WASH SOILED CLTHG BEFORE REUSE. WASH
HANDS BEFORE EATING/SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:USED AS AN EXTING MEDIA. TAKE CARE TO PREVENT SPREAD OF
BURNING LIQUID WITH WATER. CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. RESP PROT:29 CFR 1910.134 TO REMOVE A COMBINATI ON OF
PARTICULATES AND VAPORS. VENT:DECOMPOSITION PRODUCTS DURING WELDING
OR FLAME CUTTING ON SURFACES COATED WITH PROD.

Boiling Pt:B.P. Text:280F,138C
Vapor Density:HVR/AIR
Spec Gravity:0.875
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
VARIOUS HYDROCARBON FRAGMENTS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.